AMT Datasouth Fastmark M5 Plus Series Guide de l'utilisateur télécharger pdf (Page 20)

Document #120522 Rev-A

3.7 Cutter Module Installation (Option)

1. Pull the top cover open levers to open the top cover.

2. Remove the front panel from the lower cover.

Fig. 22 Pull the lever to open the cover

3. Lift and hold the top cover while pushing down and sliding the cover support

arm backwards to release.

4. Use a screwdriver to remove 6 screws on the lower inner cover.

Fig. 23 Remove 6 screws from lower inner cover

Lower Cover

Screws

Top Cover

Screws

Top Cover Support

Flute

Lower Cove

Lower Inner Cove

Front Panel

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 41 42

Pas de commentaire

AMT Datasouth Fastmark M5 Plus Series Guide de l'utilisateur Page 20