AMT Datasouth Fastmark M5 Plus Series Guide de l'utilisateur télécharger pdf (Page 16)

Document #120522 Rev-A

4. Turn over the printer. Remove two screws located near the top cover hinge,

and remove one screw at memory card cover.

5. Separate the top, inner, and the lower cover.

6. Thread the sensor cable through the bezel. Connect the peel-off panel cable to

the 5-pin socket on printer PCB.

Fig. 14 Connect peel-off sensor cable to main board

Fig. 15 Peel-off sensor cable installation

Peel-off

panel

Peel-off panel

Cable

5-pin Socket

PCB

Mounting Tabs

Bezel

Slot

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 41 42

Pas de commentaire

AMT Datasouth Fastmark M5 Plus Series Guide de l'utilisateur Page 16