AMT Datasouth Fastmark M5 Plus Series Guide de l'utilisateur télécharger pdf (Page 15)

Document #120522 Rev-A

3.6 Peel-off Module Installation (Option)

1. Open the top cover and remove the front panel from the printer.

Fig. 12 Remove the front panel

2. Lift and hold the top cover while pushing down and sliding the cover support

arm backwards to release.

3. Use a screwdriver to remove 6 screws on the lower inner cover.

Fig. 13 Remove 6 screws from lower inner cover

Front Panel

Lower Cove

Screws

Lower Inner

Cover

Top Cover

Screws

Top Cover Support Arm

Flute

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 41 42

Pas de commentaire

AMT Datasouth Fastmark M5 Plus Series Guide de l'utilisateur Page 15