AMT Datasouth Fastmark M7 Series Guide de l'utilisateur télécharger pdf (Page 27)

Page of 73 27

2.6.5 Loading Media in Rewind Liner with Label Mode (Option)

This mode can rewind the media including liner and label on the rewind spindle.

1. Lift open printer right side cover.

2. Insert the supply holder guide and paper core into the internal rewind for 1” core

label roll.

Insert the supply holder guide, 3” label core adapter and paper core into the internal

rewind for 3” core label roll.

1” core label roll 3” core label roll

3. Insert media into the printer label spindle. Pull label roll leading edge forward

through the media guide bar, damper media sensor and place the label leading

edge onto the platen roller. (Please refer to section 2.6.1)

4. Then, pull approximately 650mm of label through the label redirect front panel.

5. Wrap the label onto the internal rewind spindle and stick the label onto the paper

core.

Paper core

Supply

holder guide

Supply holder guide

Paper

core

3” label core adapter

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 72 73

Pas de commentaire

AMT Datasouth Fastmark M7 Series Guide de l'utilisateur Page 27