AMT Datasouth Fastmark M7 Series Guide de l'utilisateur télécharger pdf (Page 21)

Page of 73 21

2.6.2 Loading Fan-fold Labels

Fan-fold media feeds through either the bottom or rear external label entrance chute.

1. Lift open printer right side cover.

2. Push the print head release lever to open the print head mechanism.

3. Insert the fan-fold media through the bottom or rear external label entrance chute.

4. Pull fan-fold label leading edge forward through the media guide bar, damper

media sensor and place the label leading edge onto the platen roller.

5. Adjust the label guide by sliding to fit the paper width.

6. Close the print head mechanism making sure the latches are engaged properly.

7. Set the media sensor type and calibrate the selected sensor. (Please refer to

section 3.1.2)

Note: Please calibrate the gap/black mark sensor when changing media.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 72 73

Pas de commentaire

AMT Datasouth Fastmark M7 Series Guide de l'utilisateur Page 21