Amt-datasouth 400 Manuel d'utilisateur télécharger pdf (Page 67)

User's Guide 67

Cleaning the Platen Roller

It is recommended that the platen roller should be cleaned when:

• Excessive dusty condition exists.

• Following a media jam where the adhesive comes in contact with it.

Turn off the printer and open the top cover.

Lift the print head module to the vertical position.

Rub the full length of the platen available with a piece of cotton, which has been moistened with Isopropyl

Alcohol.

Manually rotate the platen and repeat step 3 until the entire platen has been cleaned.

Figure 21 – Platen Roller

Note: The roller should be cleaned whenever it has been in contact with foreign materials such as dust or

adhesives.

Platen Roller

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 77 78

Pas de commentaire

Amt-datasouth 400 Manuel d'utilisateur Page 67