AMT Datasouth Fastmark 4600 PLUS Series User's guide Guide de l'utilisateur télécharger pdf (Page 36)

Procedure to Enter into Set-up Mode

1. Power on the printer.

2. When the “ READY” message is displayed on the LCD, press [PAUSE] once

to enter off-line mode. Press and hold [FEED] and then [PAUSE] buttons.

Release buttons.

3. Press and hold [FEED], then press [PAUSE] button repeatedly to scroll to

the feature that you want to change.

4. Press [CANCEL] button once to select feature.

5. Press and hold [FEED], then press [PAUSE] button repeatedly to scroll to

the desired value of the displayed feature.

6. Once the desired value is displayed, press [CANCEL] button to save it.

After pressing the [CANCEL] button an * should appear in the last column.

The * is used to designate the stored value in non-volatile memory.

7. Press the [PAUSE] button once to save, and again to return to normal

mode.

Note: Do not enter set-up mode while the printer is printing or while the host is

sending data.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 90 91

Pas de commentaire

AMT Datasouth Fastmark 4600 PLUS Series User's guide Guide de l'utilisateur Page 36