AMT Datasouth Accel-7450 Guide de l'utilisateur télécharger pdf (Page 9)

- 9 -

Installing the ribbon cartridge

1. Remove ribbon cartridge from the plastic bag. Remove and dispose of

ribbon retainers (qty-2).

2. Make sure the power switch is OFF. Open the front cover. Move the print

head to the center of the printer.

3. Adjust the GAP LEVER to the highest position.

4. Pull the PINCH ROLLER ASSEMBLY forward and turn the back side

upward to expose the RIBBON MASK.

5. Lock the ribbon cartridge into the printer chassis (right & left side).

6. Carefully slide the plastic RIBBON GUIDE holes onto the left and right

carrier pins.

7. Rotate the RIBBON FEED KNOB in the direction of the arrow to remove

slack.

8. Return the PINCH ROLLER ASSEMBLY and GAP LEVER to their

normal operating position.

CAUTION

Do not touch the print head immediately after

printing because it may be too hot.

Ribbon mask

Ribbon guide

Print head

Ribbon cartridge

Ribbon feed knob

Gap lever

Pinch roller assembly

Head carrier pin

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 37 38

Pas de commentaire

AMT Datasouth Accel-7450 Guide de l'utilisateur Page 9