AMT Datasouth Accel-7450 Manuel d'utilisateur télécharger pdf (Page 10)

ACCEL-7450

5. Press the ENTER key a second time to print “H” pattern. Paper will advance

forward.

6. Press the LF key to decrease “HEAD GAP ADJ DW” value displayed on LCD.

Press the ENTER key twice to print and verify “H” pattern. Continue repeating

this step one number setting until “H” pattern print disappears. NOTE: if “H”

pattern print was not witnessed during first print pass, increase numeric value

one setting until “H” pattern print appears.

7. Press the RLF key to increase/adjust “HEAD GAP ADJ DW” value by five

additional settings. Explanation: current down value ~6~ (no “H” print) + 5 = 11,

the final down setting.

8. Press the TEAR OFF key to enter “HEAD GAP ADJ UP” mode and verify value

displayed on LCD. Typical factory setting is 40 ~ 50.

HEAD GAP ADJ DW

HEAD GAP ADJ UP

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

AMT Datasouth Accel-7450 Manuel d'utilisateur Page 10