AMT Datasouth Accel-7450 Manuel d'utilisateur télécharger pdf (Page 10)

ACCEL-7450

Initialization #2 (Tractor)

Scope:

This function is used to calibrate and set rear tractor media sensor thresholds.

Procedure:

1. Select control panel AUTO print gap, and Tractor modes.

2. With the printer power turned OFF and no paper loaded, press and hold the

ONLINE and EJECT/LOAD keys while turning ON the printer power switch. Hold

keys until printer initialization (carriage movement) is completed. The LCD

display will read “EEPROM INITIAL 2, TRACTOR MODE “.

3. The paper will feed into the printer comparing open and closed tractor sensor

readings to set the appropriate media in/out thresholds.

4. The initialization process is completed when the printer returns to a READY

state.

END OF PROCEDURE

1 2 ... 5 6 7 8 9 10 11

Pas de commentaire

AMT Datasouth Accel-7450 Manuel d'utilisateur Page 10