AMT Datasouth Accel-7450 Guide de l'utilisateur télécharger pdf (Page 24)

- 24 -

Printer settings via printer control panel

1. With ribbon installed, print current settings by pressing the

LOAD/EJECT and LF/FF keys while turning ON the printer power

switch. Release keys and load cut sheet paper to print settings.

2. Review printout. The highlighted settings (gray background) depict

current feature setting.

3. In the online mode, press and hold the LOAD/EJECT key, and then

press the ONLINE key. Hold keys simultaneously for 3 seconds. The

ONLINE LED and COPY LED will blink twice simultaneously to indicate

MENU mode.

4. Load cut sheet paper, the title and first MENU will print. The underlined

features are the default settings. The print head will stop at the default

setting.

5. Key functions:

LOAD/EJECT key selects the menu option or menu setting value.

LF/FF key enters into the submenu or confirms menu setting value.

ONLINE key returns to upper menu (continue pressing the ONLINE key

will return to main menu and save new settings).

6. Exit menu settings by cycling the printer power. Refer to next page for

menu listing and default values.

With Ethernet interface connected, the

MAC Address, DHCP status, IP Address

Subnet and Gateway will print on MENU

listing.

AMT Documax 5380 Current Settings

Use the LOAD/EJECT key to point the print head to the desired setting.

Use the LF/FF key to confirm the current setting.

Use the ONLINE key to go back the previous menu.

Press and hold the ONLINE key to save settings and exit.

Current settings are New settings will be FILLED.

MAC: XX-XX-XX-XX-XX-XX DHCP: YES IP: 10.0.0.1 Subnet: 255. 255. 255.0 gateway: 255.255.255.255

SYSTEM SETUP CHARACTER PAGE LAYOUT PRINT SETUP SERIAL I/F

BREAK PIN

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

Pas de commentaire

AMT Datasouth Accel-7450 Guide de l'utilisateur Page 24